Embassy Flag, Marine Corps Flag


U.S. MARINE CORPS FLAG
Marine Corps flags, Marine Corps flag lapel pins, Marine Corps desktop flags
Embassy Flag is a SAM registered US Government Contractor CAGE CODE 59CS8, and employs USMC veterans (OIF).
Order US Marines flag items from the pull down menu below or see Bulk Pricing

Order Menu

US Marine Corps flags are 200 denier nylon, USA made,
and finished with heading and brass grommets.

U.S. Marine Corps flag

U.S. Marine Corps Indoor Flag
Nylon with pole hem and fringe

Indoor / Parade flagpoles & accessories

Marine Corps indoor flag

Marine Corps boat flag, ensign, courtesy flag
12"x18" 200 denier nylon
finished with heading and brass grommets.

Marine Corps boat flag

U.S. Marine Corps Desktop Flag
4"x6" soft nylon miniature flag
mounted on a 10" black staff w/ golden spear point

Marine Corps desktop flags

Desktop Flag Stands / Bases - for 4"x6" desktop flags
# 1-7 hole black plastic, #10 & 12 hole wood 

Desktop flag stands

U.S. Marine Corps emblem lapel pin
Etched & Die Struck Enamel flag lapel pins on brass
1" (24 mm)
USMC / USA crossed flag lapel pin

Marine Corps emblem lapel pin Marine Corps / USA crossed flag pin

Marine Corps premium lapel pin
Polished brass with enamel
3/4" (19 mm) pin - $10.95

Marine Corps premium lapel pin

Embassy Flag also supplies made to order regulation Marine Corps unit flags, officer flags and regulation guidons

MARINE CORPS MCO 10520.3 B FLAG MANUAL

Marine Corps Air Station
MCAS Miramar guidon
USMC Fleet Marine Force
FMF Marine Corps guidon

Outdoor Marine Corps flags are USA made of nylon flag material and are finished with a canvas heading and two brass grommets on the hoist side, 2 rows of stitching top and bottom sides and 4 rows of stitching on the fly side. They are attached to the flagpole by means of a halyard (rope) and flag snaps, or to smaller poles with flag fasteners. Standard sizes for outdoor military flags are 2x3 ft, 3x5 ft, 4x6 ft, 5x8 ft. and 6x10 ft. Larger sizes are available made to order.

U.S. Marine Corps boat flags are nylon, 12”x18” size with 2 brass grommets.

Indoor Marine Corps flags are stocked in 3x5 ft nylon (4x6 ft. size is made to order), and feature a pole sleeve with a flannel liner and a tab sewn inside the sleeve. The tab attaches to a hook or screw a top of the parade or display flagpole to keep the flag from sliding down the pole. Indoor and parade flags are finished with two-inch gold rayon fringe. These flags are also available with a pole sleeve only and no fringe (made to order, allow 2 weeks). All indoor flags are USA made.

3x5 ft indoor flags are typically displayed on either 7 ft or 8 ft poles. 4x6 ft indoor flags are typically displayed on 9 ft poles. Poles are available in polished hardwood and either silver or gold anodized aluminum. Indoor floor stands are available in either weighted ABS plastic or cast metal in gilt, brass or chrome finishes. Flagpole finials for indoor / parade poles are available in ABS plastic and both brass or chrome metal finishes.

Marine Corps desktop flags are made in the United States. Size is 4 x 6 inch, lightweight nylon material, hemmed all four sides, mounted on 10” black staffs with a golden spear point. Table top bases are available in black plastic to display from 1- 7 flags. Wood bases are available with either 10 holes or 12 holes to display additional flags.

Stick flags, hand held mounted flags are 8 x 12 inch, lightweight nylon, fully hemmed, mounted on a ¼” x 18” black wood dowel with a golden spear point, and made in America. Sold in quantities of 12/box.


About Embassy Flag
Embassy Flag copyright